Why my CDR Rejected by Engineers Australia?
This is the question which many Engineers asked after getting rejected from Engineers Australia.
CDR Report is a professional permit that allows you to work as an engineer in Australia. With the help of a good CDR Report not only that you will be able to work in Australia but also it will help you gain the professional experience that you always wanted. Most of the international engineers move to Australia or plan to move to Australia after graduating from their engineering college. But there are certain steps that one must go through in order to become able to work in Australia. This includes writing a professional CDR Report sample. This CDR writing will determine whether you will be able to get skilled migration by Engineers Australia or not.
Engineers Australia is the official authority that assesses the CDR Report of all the Engineers planning to move to Australia. There is a set standard of Engineers Australia that every engineer has to meet. If you don’t fall on the set standard then most likely you will get rejected by Engineers Australia.
Why CDR Report gets rejected?
When it comes to writing a good CDR Report most of the people fail to make it through because it requires good communication skills to write an outstanding CDR Report. This leads to rejection by Engineers Australia. This leads to people copying someone else’s CDR Report thinking that it will help them get approval by Engineers Australia. The main reasons why CDR Report gets rejected are as follows:
Plagiarism in CDR Report
One of the main reasons why CDR Report gets rejected is because of plagiarism. While writing CDR Report most people find it hard to use proper wording that helps make the report look and sound more professional. Instead of taking help from a professional writer people copy CDR Report content which leads to plagiarism in their CDR writing. Most of the CDR writings that you see on the internet are samples. These are not put out there to be used by people in witting their CDR Report.
If you copy samples from the internet then most likely the Engineers Australia authority will track it down and it will lead to your rejection. This results in a waste of both time and money. Engineers Australia will be able to detect the plagiarism from your CDR.
This is one of the main reasons why most of the CDR Reports get rejected and you should definitely avoid that.
Adding too much information
Another main reason for CDR Rejection is that most of the people are in doubt whether to write too much detail or keep it to the point. This leads to people adding extra information because they want to avoid rejection by Engineers Australia. Little do they know that adding extra information is one of the leading causes of rejection by Engineers Australia. When it comes to writing technical details is always better to be to the point. Adding extra calculations, documents, and photos will lead to the degradation of your CDR. You have to avoid this at all costs. Therefore it is always better to avoid too many calculations in the CDR Report and make it to the point. It should be nicely elaborate by using points.
Too many calculations in Career Episode
Another big reason for rejection of CDR Report is that people add too many calculations in their Career Episodes. This not only makes it hard for the reader to go through the CDR Sample but also it will lead to rejection by Engineers Australia. In each Career Episode, an individual is supposed to mention his skills and qualifications according to the set guidelines of Engineers Australia. According to the guidelines of Engineers Australia it is clearly mentioned that the individual must not make their CDR Report full of technical information especially when it comes to Career Episode.
If there are any necessary calculations related to your CDR Report and Career Episode then you must include then but adding too many calculations and technical information will simply lead to rejection by Engineers Australia. Your communications skills are always being judged through your CDR Report so its to strictly follow the set guidelines of Engineers Australia for CDR Report.
Exceeds set word limit
This is also a very big reason why people get their CDR Report rejected by Engineers Australia. There is a set word limit by Engineers Australia. It is important to follow this word count which is 1000-2500 words. Every individual is supposed to follow the word limit of every section of the CDR Report. If someone provides extra details and adds too much information in the CDR Report thinking that it will help him get the approval by EA then he is simply thinking wrong because that’s not how Engineers Australia assesses you. So the best thing to do is include valuable information in the CDR Report and avoid excessive information so that you don’t exceed the word limit.
Lack of communication skills
When you are writing your CDR Report it is important to make sure that you only use professional language and vocabulary in your CDR Report. The key to writing a good CDR Report is to keep it professional and avoid making it hard to read for the authorities. Most people lack communication skills which make it very hard for them to write a professional CDR. You can always seek the help of a professional writer but lacking communication skills is one of the main reasons for rejection of CDR.
Another important thing that an individual must keep in mind is the grammar mistakes. When you are writing a CDR Report you must always make sure that it doesn’t include any technical mistakes or grammatical errors. It is better to pay attention to such mistakes and correct them before you send your CDR Report to Engineers Australia. The sentences should make sense. Your report must look like its written by a professional writer. A good CDR Report includes details about the person’s profile, company details, location, qualification, etc. You must only write the information that is required in the report. Writing extra information or leaving grammatical error can be a big reason for your rejection by Engineers Australia. Make sure to write information in chronological order and use bullets. Make sure to explain the information in a way that is easy to understand and read.
Improper summary statement
Summary Statement is a very important part of CDR Report Australia. It describes summarized information related to all of the three Career Episodes. Any error in writing your summary statement can lead to rejection by Engineers Australia. Therefore it is always better to pay close attention when it comes to wiring summary statements.
Missing any one of the Career Episode
Many people are not aware of this but one of the main reasons for rejection of CDR Report is missing any of the three Career Episodes. It is mandatory to write three Career Episodes in your CDR Report in order to avoid rejection by Engineers Australia. Career Episode provides details about the individual’s qualifications and skills. It also explains any work experience or internships that an individual has done over the years. You can also mention your achievements in the Career Episode. Therefore it is mandatory to write three Career Episodes in the CDR Report to avoid rejection.
Using different language to write CDR
It often happens when an international candidate is applying for skilled migration that they use a different language in writing their CDR Report. It is mandatory for every individual to write their CDR Report in English. The best thing a person can d is followed Australian English but since most people are not aware of that the set language according to Engineers Australia guidelines in English. If you write CDR Report in a different language then you must get it translated in the English language so that the authorities will be able to understand it.
Only mention your work experience
When it comes to writing a CDR Report you must mention your experiences only. Whether you were working in a group project or with a team it doesn’t matter. What matters is your personal work experience and it is mandatory to mention it in the CDR Report. This helps determine whether the individual is qualified enough to get skilled migration by Engineers Australia or not. Therefore adding irrelevant work experience can lead to rejection by Engineers Australia.
Avoiding problem statements
There are many people who do not prefer writing about their problems in the CDR. It is mandatory to mention problems and the possible solutions that you used in order to solve such problems. This part is crucial in writing your CDR Report. This helps clarifies your accomplishments and contributions to your work. So make sure that you write a worth reading problem statement in your CDR report.
These are the most common reasons for rejection of CDR Report by Engineers Australia and it is better to avoid all such problems in order to get that approval you’ve been dreaming of.
Get CDR report at 20% discount from Best CDR Writing.